Concentrate Foam Unit - Wall Mounted
Dilute on the fly and produce high volumes of foam for regularly cleaned areas with a wall mounted unit.
- Draws from concentrated product
- Dilutes at ratios of 14:1 to 320:1
- Powered by compressed air
- Stainless steel ball valve and wand
- Stainless steel fluid fittings
- Quick-change pump
- Color coding options:
- Discharge hose – 4 colors (BL, GN, YL, RD)
- Consistent, reliable dilution rates, regardless of changes in water pressure
Power Type: Compressed air
Chemical pickup type: Draws from concentrated product
Dilution ratio range (water:chemical): 14:1 to 320:1
Number of products unit can draw from: One product
Suction line/length diameter: 8 ft. (2.4 m) clear hose with 1/4 in. (6.4 mm) inside diameter
Discharge hose length/diameter: 50 ft. (15 m) hose, with 3/4 in. (19 mm) inside diameter)
Discharge wand/tip type: 7 in. (17.8 cm) stainless steel wand with zero tip and ball valve
Output Distance: 25-30 ft. (7-9 m)
Output Volume: 20-45 gal/min (75-170 l/min) of foam
Flow Rate: 2 gal/min (7.6 l/min). *Dilution rates and flow rates given are based on chemical with viscosity of water and factory air pressure settings.
Pump seals: Santoprene, Viton, or Kalrez
Compressed Air Requirements: 40-80 psi (3-5 bar) with 5-8 cfm (141-227 l/min)
Water Requirements: 10-100 psi (0.69-6.9 bar) Backflow prevention is required – consult local plumbing ordinances for more information.
Liquid temperature range: 40-100˚F (4.4-37˚C)
Chemical compatibility: Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.
- Control box assembly
- Discharge hose and wand
- Mounting hardware
- Metering tip kit for foam injector
- Stainless steel hose rack
- User manual