2 Tap Stainless Jumper Box - Front Inputs
A Jumper Box™ is the solution for dispensing taproom quality draft beer—or any kegged beverage—in a mobile bar, beer trailer, or for any portable catering experience.
Constructed identically with the same integrity as our premium jockey boxes, Jumper Boxes™ chill your beverage instantly as it flows through their food-grade stainless steel coils, kept cold by ice filled inside the cooler.
Their only difference is—rather than being limited to dispensing your beverage from a faucet attached directly to a jockey box, when your beverage exits a Jumper Box™ it travels through a second beverage line to its faucet in your own preferred location. The most popular applications include faucets mounted to the exterior of a beer trailer or as part of a countertop beer tower inside a mobile bar.
This valuable benefit allows you the flexibility to install your faucets (taps) anywhere it’s most convenient for the style of service you want to offer your guests and types of events you entertain.
See Input Location (further below) for additional considerations when picking a Jumper Box™ that’s right for you.
- Premium steel-belted cooler
- All stainless steel construction
- Reinforced coil-to-shank assembly designed to prevent blowouts
- Heavy-duty shank plates
- Your choice of 50' or 100' coils hold and continuously chill 17 oz or 34 oz of liquid, respectively (consider: 50' coils if you're pouring pints for friends, 100' coils if you're filling pitchers non-stop for the masses)
- Custom COLDBREAK® Design
- Every jockey box is hand-built in Michigan by COLDBREAK® and backed by our warranty
More Product Information
Weight: 36 LBS (no ice)
Ice Capacity: ~35-40 LBS
Dimensions: 24"L x 18"W x 16.5"H
Inputs: The beverage lines—known as Keg Jumpers—that connect from your kegs to your Jumper Box™ attach to inputs that are located on the front of the Jumper Box™. These front inputs are on the same side and adjacent to the faucet shank assemblies, from where your beverage is dispensed.
Having the inputs on the front of your Jumper Box™ lends well to an installation layout where your Jumper Box™ may be mounted low in a beer trailer (with kegs placed on either side). This would complement a design, for example, where you might install a countertop beer tower and be able to conveniently run your Shank Jumpers (beverage tubing) up through the tower to your faucets.
Pro consideration: This pouring scenario would work well being located on your front counter (bartender faces approaching guests while pouring), opposite on a back bar (bartender has their back to guests while pouring), or off to the side (for an unobstructed service counter).