10 gallon Foam Unit, Lithium-ion Battery Powered
FI-BP-10N-YL-H12YL
The battery powered 10 gallon foam units are designed to draw from pre-mixed solution and are powered by a 24v lithium-ion battery. They have hinged back plates for easy access to components and quick-change pumps for easy maintenance. Other features include natural color tanks, hose wraps, and in-line strainers.
- Ideal for drain foaming, spot cleaning, and more
- Draws from pre-mixed solution
- Battery powered – no air lines or power cords to hold you back
- To extend usage time, additional batteries can be used
- Easy-to-read battery level indicator on the battery
- Designed for easy serviceability
- Ideal for drain foaming, spot cleaning, and more
- Natural color tank for easy visibility of product levels
- Hinged lid
- Integrated hose wraps
- In-line strainer to protect pump from debris
- Splash proof battery box for battery protection
Power type: Lithium-ion battery
Battery Charge Time: 1 hour 10 minutes
Battery Run Time: 45 minutes of continuous use
Chemical pickup type: Draws from a pre-mixed solution
Number of products the unit can draw from: One Product
Suction line: 3/8" (9.5 mm) Inside diameter
Capacity: 12.5 Gallons
Discharge hose: 12 ft. (3.7 m) hose, with 3/8 in. (9.5 mm) inside diameter
Discharge wand: Polypropylene spray gun with 80˚ fan tip
Output distance: 2-6 ft. (0.3-1.8 m)
Output volume: 3 gal/min (11.4 l/min)
Flow Rate: 0.5 gal/min (1.9 l/min)
Wheel type: Two 10 inch non-marking wheels
Pump Seals: Santoprene diaphragm, Viton check seals
Electrical requirements: 100-240 VAC at 60 Hz, 3 amp max (GFCI protected outlet) for battery charger only
Operating Voltage: 24 VDC
Liquid temperature range: 40-100˚F (4.4-37˚C)
Chemical compatibility:
