5 Gallon Smart Foam Unit
FI-5N-SM-GN
- Drop-shipped from FOAMit. Please allow 1-2 days for processing.
- In stock
The 5 Gallon Smart Foam Unit is a technologically advanced cleaning tool that is safer to use and maintain than traditional models. It features user-friendly controls to minimize chemical exposure and maximize control. The unit is easy to use, with a comfortable handle and wand, and draws from pre-mixed solution using compressed air. It also features a hinged back plate for easy access to components, a quick-change pump, and a natural color tank for easy visibility of product levels.
- Safer to store and maintain
- Protects user and surroundings from chemical exposure in the event of a fall or accident
- Gives you more control and flexibility
- Easy ON/OFF operation
- Handle and wand are tough but lightweight, with fan tip and built-in zero tip
Power type: Compressed air
Chemical pickup type: Draws from a pre-mixed solution
Number of products the unit can draw from: One Product
Capacity: 5 gallons (18.93 liters)
Discharge hose: 20 ft. (6 m) bonded hose, with 5/8 in. (15.9 mm) and 1/4 in. (6.4 mm) inside diameters
Discharge wand: Ultra high molecular weight (UHMW) polyethylene handle and wand, with 65˚ fan tip and built-in zero tip
Output distance: 8-12 ft. (2.4-3.7 m)
Output volume: WITH ZERO TIP: 20-32 gal/min (75-121 l/min) of foam, WITH FAN TIP: 20-32 gal/min (75-121 l/min) of foam
Flow Rate: 2 gal/min (7.6 l/min)
Wheel type: Two 3 inch non-marking wheels
Compressed air requirements: 40-80 psi (3-5 bar) with 5-8 cfm (141-227 l/min)
Liquid temperature range: 40-100˚F (4.4-37˚C)
Chemical compatibility:
Choose a pump seal material that is compatible with the chemicals you will use. Chemical incompatibility can cause accelerated wear and equipment failure that is not covered by warranty, so it's important to do your research.
- Consult the safety data sheet (SDS) for your chemical to learn about the ingredients.
- Use a chemical compatibility database (like this one: https://www.coleparmer.com/Chemical-Resistance) to look up the ingredients and find material compatibility info.
- Note that the concentration of chemicals makes a big difference in compatibility. Think about whether the chemical you use will be in a pre-diluted or concentrated form when it is used in the equipment.
- If you need help, ask your chemical manufacturer. Or, send your SDS to techsupport@foamit.com and they can help.
