Concentrate Foam Unit - Wall Mounted by FOAMit
Concentrate Foam Unit - Wall Mounted Colors by FOAMit
Concentrate Foam Unit - Wall Mounted Assembly by FOAMit
Concentrate Foam Unit - Wall Mounted by FOAMit
Concentrate Foam Unit - Wall Mounted by FOAMit
Concentrate Foam Unit - Wall Mounted in Use by FOAMit
Concentrate Foam Unit - Wall Mounted by FOAMit
Concentrate Foam Unit - Wall Mounted by FOAMit

Wall Mounted Foam Unit, Concentrate, Santo

FI-WC-RD

Regular price$ 1,499.99
/

Discharge Hose Color
  • In stock
  • Inventory on the way
  • This item is drop shipped directly from our neighbors at FOAMit.
  • Due to the manufacturer's order processing time, this item will take 3-4 business days to ship from its warehouse.
  • Does not qualify for free shipping. Cannot be shipped outside of the USA.

Dilute on the fly and produce high volumes of foam for regularly cleaned areas with a wall mounted unit.

  • Draws from concentrated product
  • Dilutes at ratios of 14:1 to 320:1
  • Powered by compressed air
  • Stainless steel ball valve and wand
  • Stainless steel fluid fittings
  • Quick-change pump
  • Consistent, reliable dilution rates, regardless of changes in water pressure

Power type: Compressed air

Chemical pickup type: Draws from concentrated product

Number of products the unit can draw from: One Product

Suction line: 8 ft. (2.4 m) clear hose with 1/4 in. (6.4 mm) inside diameter

Discharge hose: 50 ft. (15 m) hose, with 3/4 in. (19 mm) inside diameter)

Discharge wand: 7 in. (17.8 cm) stainless steel wand with zero tip and ball valve

Output distance: 25-30 ft. (7-9 m)

Output volume: 20-45 gal/min (75-170 l/min) of foam

Flow Rate: 2 gal/min (7.6 l/min)

Compressed air requirements: 40-80 psi (3-5 bar) with 5-8 cfm (141-227 l/min)

Water Requirements: 10-100 psi (0.69-6.9 bar) Backflow prevention is required – consult local plumbing ordinances for more information.

Liquid temperature range: 40-100˚F (4.4-37˚C)

Chemical compatibility: Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.


Recently viewed