Walk-Through Footwear Sanitizing Unit
SS3
The SS3 footwear sanitizer is a compact, low cost way to quickly and efficiently apply sanitizer to the bottom of footwear in an easy to use, walk through model. Designed for dry facility environments, the SS3 increases pathogen prevention while maintaining minimal moisture output.
Using only compressed air the SS3 applies 0.2 ounces of sanitizer to the bottom of each boot, simultaneously, via 8 misting nozzles (4 per boot). The misting output reduces over-spray while still providing adequate solution coverage to the entire sole, preventing cross contamination between high risk environments and control zones.
- Users can enter from either side to smooth traffic flow in busy areas
- Walk-through design ensures compliance
- Low-moisture system
- Air-operated pump delivers a consistent amount of sanitizer (0.4 oz/11.81 mL) per spray
- Collection basin is easy to access or swap out for cleaning
- Draws from pre-mixed solution
- Works with our chemical jugs or your chosen chemical reservoir with ¼ in. suction line
- Powered by compressed air
- Easy to disassemble and clean
- Adjustable leveling feet
Power type: Compressed air
Chemical pickup type: Draws from a pre-mixed solution
Number of products the unit can draw from: One Product
Dimensions: 29.5 x 28 x 42 in. (74.9 x 20.3 x 106.7 cm)
Output volume: 0.4 oz (11.83 mL)
Flow Rate: 0.4 oz (11.83 mL)
Compressed air requirements: 60-80 psi (4.1-5.5 bar) with 1 cfm (28.3 l/min) Regulator not included with unit
Liquid temperature range: 40-100˚F (4.4-37˚C)
Chemical compatibility:
