foamit 5 gallon foamer with pump
foamit 5 gallon foamer with pump
foamit 5 gallon foamer with pump cleaning a brewery
foamit 5 gallon foamer with pump with quick change pump
5 gallon foamit color coding available

5 Gallon Foam Unit


Regular price$ 1,349.99

Lid and Hose Color
Pump Seal

The 5 Gallon Foam Unit is a versatile cleaning tool powered by compressed air and featuring a hinged back plate for easy access to components. It comes with a 20-foot discharge hose and is compatible with various pump seal materials to suit your cleaning chemical needs.

Power type: Compressed air

Chemical pickup type: Draws from a pre-mixed solution

Number of products the unit can draw from: One Product

Suction line: 3/8" (9.5 mm) Inside diameter

Capacity: 5 gallons (18.93 liters)

Discharge hose: 20 ft. (6 m) hose, with 1/2 in. (12.7 mm) inside diameter

Discharge wand: 7 in. (17.8 cm) stainless steel wand with zero tip and ball valve

Output distance: 15-20 ft. (4.6 to 6 m)

Output volume: 15-30 gal/min (57 to 144 l/min) of foam

Flow Rate: 2 gal/min (7.6 l/min)

Wheel type: Two 3 inch non-marking wheels

Compressed air requirements: 40-80 psi (3-5 bar) with 5-8 cfm (141-227 l/min)

Liquid temperature range: 40-100˚F (4.4-37˚C)

Chemical compatibility: Chemical products used with this equipment must be formulated for this type of application and compatible with unit materials and pump seals. For more information on chemical compatibility, consult the manufacturer or SDS for your product or contact our customer service department.

Choose a pump seal material that is compatible with the chemicals you will use. Chemical incompatibility can cause accelerated wear and equipment failure that is not covered by warranty, so it's important to do your research.

  • Consult the safety data sheet (SDS) for your chemical to learn about the ingredients.
  • Use a chemical compatibility database (like this one: to look up the ingredients and find material compatibility info.
  • Note that the concentration of chemicals makes a big difference in compatibility. Think about whether the chemical you use will be in a pre-diluted or concentrated form when it is used in the equipment.
  • If you need help, ask your chemical manufacturer. Or, send your SDS to and they can help.

You may also like

Recently viewed